Frey Brothers, Inc

Chutes

The Frey Special Chute

The Frey Special Chute

The Frey Special Chute is designed for the small breeder in general. It has also been widely used by many cattlemen with portable corralling as a dressing chute just before cattle enter the sale ring and also as a washing and general working chute. A special feature of this Frey chute is its four side gates with a center post so all four gates can be opened to completely expose the animal. It can also be used as a portable unit if so desired.


The World's Stoutest Chute

The World's Stoutest Chute

The squeeze sides are designed so that the bottoms pivot on two 7/8" pins and can be adjusted in or out to fit the size of cattle being worked. These sides are the world's strongest, made of a 2 3/8" tube frame and a 2 3/8" O.D. center piece. This is the life of any squeeze chute. The "V" shaped design of this center squeeze tends to lift the animals off their feet as the pressure is applied, and this cuts down the animal's ability to struggle. The nine 1" pipes on the upper half of the center squeeze drop down 3 at a time rather than one at a time. The hoof panel on the bottom half of the center squeeze lift in two pieces so as to expose either the front feet, or the back feet and udder area of the animal. Built-in palpation unit standard on all Frey chutes. Overall length 10' - height 6''. Now compare these features on the Frey Chute - strength, ease of operation, quality, and price. No other chute has more to offer than a Frey Chute for squeeze-ability and speed. Weight of Chute: 1550 lbs, less trailer.


The Portable Loading Chute

The Portable Loading Chute

The completely new design of this loading chute uses the axle for a fulcrum to adjust height according to truck being loaded, yet keeps the upright bars perpendicular, so there are no openings at either end of chute for any size animal to escape. The flooring is made of 2" x 12" material with low risers which animals readily walk up. Front stand is provided for added safety. Adjusts to any truck bed height! (except top deck of double). Uprights always parallel to truck and building. Side bars always parallel to chute floor! Standard Size: 14 feet long by 36 inches wide.